Originally Posted by tenpoint
Instructions for Coolsat 4000, 5000 & 6000
It is recommended that you highlight, copy and paste these instructions into a Word Document and print them out. You will need them when you take the receiver to your TV.

It is Recommended that you Write Down All Dish Settings BEFORE Proceeding !!!!


Before connecting or disconnecting the receiver to or from the TV/ PC, you must ensure the power switch is turned OFF the rear of the receiver!!!

Open a new folder and name it CoolSat

First you need to go to the COOLSAT Files Section in this Forum

Click on COMMON FILES FOR ALL COOLSAT/LATEST FILES FOR YOUR COOLSAT model and download the following files to the CS folder (YOU JUST CREATED)

1. You will need CoolSat Pro Loader v.2.4 save to CoolSat folder
2. You will need the Original Factory bin. Save to CoolSat folder
3. You will need the Newest/Current/Active bin

Download newest bin and save to Coolsat folder.

Go to CS folder and unzip files.
To unzip files, right click on file, hit extract all.


You will need to unzip the Factory and the newest current Bin file and save in CoolSat Folder. (You Created)

* Note the CoolSat Pro Loader v.2.4 will require the unzipped STB file for it to work

You now have all the tools to load your receiver and are ready to
Continue;

* Go to Menu/System settings and write down your settings for each Satellite, Go to Options and record those as well you will need them later.

Loading New File To CoolSat

1. With the receiver connected to the TV
2. Go to menu/system settings/Data base reset/enter 0000/Factory set/press OK/ select Yes/
3. Power Off receiver using switch on back of unit & disconnect from TV
4. Connect receiver to PC using supplied cable & and plug in AC power cord
5. Turn receiver power switch back on.
6. Open up Coolsat Pro Loader File
7. Hit Auto Detect--Exit
8. Using browse option, locate and select **Coolsat factory bin

This will load the original factory program to the receiver. You will see new files loading to 100%, and then old files erasing up to 100%.

* When complete, power off the receiver.

1. Disconnect the receiver from PC
2. Reconnect the receiver to your TV and turn power switch on.
3. Using the remote, select System Setting in the main menu, in the sub-menu select Database Reset, and then Factory Set, Press OK
4. When factory set is complete (language option screen appears), power off receiver and disconnect from TV.
5. Reconnect receiver to PC and switch power back on

Open up Coolsat Pro Loader File
Using browse option, locate and select from your folder the New NorW STB file.

* Once again, you will see the new files loading to 100% and old files erasing to 100%.
* When complete, power off the Coolsat and disconnect from PC
* Reconnect to TV and switch power back on.
* Using the remote, select Menu --> System Setting --> Database Reset, enter password and select Factory Set, Press OK
* After you click on save you will be back in Main Screen.
* Select language you want
* Now, press Menu --> Installation --> Dish Setting, click OK, enter password and scroll to your first satellite, You will need to enter your settings (as you wrote them down) for each Satellite LNB type, DiSEqC to 1.0 and commit the correct ports of the DiSEqC switch if you are using one. Press Exit and save.
* Next go to Options, click OK. Reset options as you had written them down.Turn on renumber Bev, if necessary. Go to renumbering local ch, click OK and enter your locale. Press exit and save.
* Go to Auto Scan; select (example) 91.0W Nimiq 1,3 as the satellite, and then select OK to run the scan. Repeat for each satellite. When done, press Exit and save.Exit to main menu.
* Back in main menu, go to System Setting. Set time settings and security-channel locks. Press exit and save. Once complete, exit from Main Menu.
* Exit until you return to full screen. The screen will say "Scramble Channel" until the keys roll and then your television program will appear.
* Watch TV


A big thanks to Furface and TopCat for the update, along with Racehound for the revision.